About the structure process analysis of twin screw extruder
发布时间 : 2020-07-30
点击 : 0
What are the technical parameters of a single screw extruder
- Categories:company news
- Author:
- Origin:
- Time of issue:2020-07-30 17:49
- Views:
(Summary description)Next,theeditorofJuliwillgiveyouabriefintroductionaboutthetechnicalparametersofthesinglescrewextruder? 1.Screwdiameter:referstothediameteroftheoutercircleofthescrew,representedbyD,andtheunitismillimeter(mm).2.Screwlength-to-diameterratio:referstotheratioofthelengthLoftheworkingpartofthescrew(thelengthofthethreadedpart,thatis,thelengthfromthecenterlineofthefeedingporttotheendofthescrew)andthescrewdiameterD,expressedbyL/D.3.Rangeofscrewrotationspeed:referstothemaximumrotationspeedofthescrewtotheminimumrotationspeedofthescrew;nrepresentsthescrewrotationspeed,andtheunitisrevolutionsperminute(r/min).HuahongAnswer4.Powerofthedrivingmotorofthemainscrew:ExpressedbyP,theunitiskilowatt(kW).5.Heatingpowerofextruderbarrel:ExpressedbyE,theunitiskilowatt(kV).6.Theproductioncapacityoftheextruder:expressedbyQ,theunitiskilogramperhour(kg/h).7.Theheightofthecenteroftheextruder:referstothedistancefromthecenterlineofthescrewtotheground,expressedbyH,andtheunitismillimeter(mm).8.Externaldimensionsoftheextruder:referstothetotallength×totalwidth×totalheight,expressedbyL×W×H,andtheunitismillimetersormeters(mmorm)9.Extruderquality:expressedbyW,theunitiskilogramorton(kgort)
What are the technical parameters of a single screw extruder
(Summary description)Next,theeditorofJuliwillgiveyouabriefintroductionaboutthetechnicalparametersofthesinglescrewextruder? 1.Screwdiameter:referstothediameteroftheoutercircleofthescrew,representedbyD,andtheunitismillimeter(mm).2.Screwlength-to-diameterratio:referstotheratioofthelengthLoftheworkingpartofthescrew(thelengthofthethreadedpart,thatis,thelengthfromthecenterlineofthefeedingporttotheendofthescrew)andthescrewdiameterD,expressedbyL/D.3.Rangeofscrewrotationspeed:referstothemaximumrotationspeedofthescrewtotheminimumrotationspeedofthescrew;nrepresentsthescrewrotationspeed,andtheunitisrevolutionsperminute(r/min).HuahongAnswer4.Powerofthedrivingmotorofthemainscrew:ExpressedbyP,theunitiskilowatt(kW).5.Heatingpowerofextruderbarrel:ExpressedbyE,theunitiskilowatt(kV).6.Theproductioncapacityoftheextruder:expressedbyQ,theunitiskilogramperhour(kg/h).7.Theheightofthecenteroftheextruder:referstothedistancefromthecenterlineofthescrewtotheground,expressedbyH,andtheunitismillimeter(mm).8.Externaldimensionsoftheextruder:referstothetotallength×totalwidth×totalheight,expressedbyL×W×H,andtheunitismillimetersormeters(mmorm)9.Extruderquality:expressedbyW,theunitiskilogramorton(kgort)
- Categories:company news
- Author:
- Origin:
- Time of issue:2020-07-30 17:49
- Views:
Information
Next, the editor of Juli will give you a brief introduction about the technical parameters of the single screw extruder?
1. Screw diameter: refers to the diameter of the outer circle of the screw, represented by D, and the unit is millimeter (mm).
2. Screw length-to-diameter ratio: refers to the ratio of the length L of the working part of the screw (the length of the threaded part, that is, the length from the center line of the feeding port to the end of the screw) and the screw diameter D, expressed by L/D.
3. Range of screw rotation speed: refers to the maximum rotation speed of the screw to the minimum rotation speed of the screw; n represents the screw rotation speed, and the unit is revolutions per minute (r/min). Huahong Answer
4. Power of the driving motor of the main screw: Expressed by P, the unit is kilowatt (kW).
5. Heating power of extruder barrel: Expressed by E, the unit is kilowatt (kV).
6. The production capacity of the extruder: expressed by Q, the unit is kilogram per hour (kg/h).
7. The height of the center of the extruder: refers to the distance from the center line of the screw to the ground, expressed by H, and the unit is millimeter (mm).
8. External dimensions of the extruder: refers to the total length×total width×total height, expressed by L×W×H, and the unit is millimeters or meters (mm or m)
9. Extruder quality: expressed by W, the unit is kilogram or ton (kg or t)
Scan the QR code to read on your phone
CONTACT INFORMATION
OFFICIAL ACCOUNTS
Welcome to follow us
ONLINE MESSAGE
客户留言
Description:
Copyright © 2020 Nanjing Juli Chemical Machinery Co., Ltd. All Rights Reserved. 苏ICP备13041019号-2 Powered by www.300.cn